Maintenance of an appliance like the refrigerator often requires that the coils be cleaned as often as possible. Dusty and grimy coils make your refrigerator work more efficiently than it ought to hence it utilizes a lot of energy, additionally, a fridge with dusty coils tends to have a lower lifespan.
Below is the process of how to clean refrigerator coils: However, if you find that you are unable to and prefer hiring professional people to do the job, there are always professional fridge repair Fort Lauderdale.
Why Clean Refrigerator Coils?
- Improved Efficiency: Cleaning the coils in a refrigerator enhances the efficiency of a refrigerator because it can then cool in the best way. This can help save energy and thus lower your electricity and or fuel bills.
- Extended Lifespan: Ad hoc checks such as cleaning of the coils therefore increase the lifespan of a refrigerator. Unsound coils make the compressor act more stressfully, and may eventually fail.
- Prevention of Overheating: Dirt accumulates on coils and could affect the heat that is required to cool the fridge; there may be other problems that may result in professional help being necessary.
Tools and Materials Needed
To clean your refrigerator coils, you’ll need a few basic tools:
- Dust mask: Safeguards you from getting contaminated with dust and other particles when breathing.
- Flashlight: Facilitates the observation of the coils particularly if they are placed at the underpart of the fridge.
- Coil condenser brush: Coil cleaner which is a specific brush used in cleaning between the coils.
- Vacuum cleaner with a brush attachment: Works on; Loose Matter; Use to clean the surface to get rid of any dust that has not compacted itself into a bigger mass.
- Compressed air (optional): Cleans areas that are hard to reach, such as the under-the-table and between-the-seat cushions.
Step-by-Step Cleaning Process on How to Clean Refrigerator Coils
1. Unplug the Refrigerator
Safety first! The first recommendation is always to ensure that you disconnect your refrigerator before you attempt to clean or maintain it. This avoids any electric-related dangers at any given point in time. Move the fridge to one side if the socket is behind it.
2. Locate the Coils
Fridge tubes are usually located either at the bottom or at the rear part of the refrigerator. If your coils are at the base /then you may have to remove a snap off the toe grill/. If they are placed at the back, one would only need to retract the fridge away from the wall to get them.
3. Warm Up and Put On Your Dust Mask
Again, while cleaning coils, some are dusty. A dust mask should be worn also, to avoid any dust and other particles in the process of painting the furniture interfering with your breathing.
4. Vacuum the Coils
Turn on your vacuum cleaner and using the brush end, pass it above the coils to remove dust and dirt that is loosened easily. This first sweeping aids in removing most of the debris on the surface of the Vinyl composition flooring.
5. Brush the Coils
Then, employing a coil condenser brush or a small paint brush clean the coils as provided in the previous step. The brush is cylindrical in shape and has a longer handle that helps in accessing the harder-to-reach regions.
To clean the brush, one has to move it to and fro and rotate it to remove any remaining dust. Switch on the vacuum cleaner to keep it sucking any dust that is released by the brush.
6. Use Compressed Air (Optional)
If there is still dust in hard-to-reach places, blow it out with a can of compressed air. Point the air towards the dusty areas and spray. Follow it up by vacuuming the loosened dust off the floor.
7. Clean Up and Reassemble
Once you are done cleaning the coils, ensure to vacuum any dirt that may have fallen on the floor. If you disassembled a grill, then assemble it back. Push the refrigerator back into the desired location if it has been moved or if it has shifted, and switch it on.
8. Regular Maintenance
It is recommended that once a year, you clean the coils of your refrigerator to ensure that it is working efficiently. If you and your home have pets, it would be wise to get it done every six months because of the pet hair and dander. Preventing costly problems is always ideal and this is why Fort Lauderdale fridge repair can be avoided through regular servicing of the unit.
Benefits of Clean Coils
Improved Efficiency
Dirty coils make it difficult for the refrigerator to cool down which in turn implies that the compressor is overworked. This in turn will help you save on electricity bills and also increase the life of your fridge.
Preventive Care
It is also important to clean the coils from time to time in a bid to prevent expensive damages. In case you are in doubt or require help, there is a reliable fridge repair in Fort Lauderdale that can help.
Additional Maintenance Tips
Check Door Seals
Check that the door seals of the fridge are clean and also in good condition for them to be effective. Faulty or stained seals can cause the cool air to escape and it means the refrigerator has to work more.
Maintain Proper Temperature Settings
Ensure that your refrigerator is set at the right temperature (commonly 37 degrees for the refrigerator and 0 degrees for the freezer). This assists the appliance to run effectively.
Avoid Overloading
It is advisable not to over-pack the refrigerator. There must be proper ventilation inside the fridge as this helps in proper cooling.
Inspect the Drip Pan
It is recommended that you clean the drip pan of your refrigerator if it has one, from time to time. The drip pan should be cleaned regularly because its smell and the overall performance of the unit can be affected if the pan is dirty.
Troubleshooting Common Issues
The fridge Not Cooling Properly
In case after cleaning the refrigerator coils the refrigerator is not cooling well then it is now time to check the thermostat and door gasket. If this problem is not rectifiable, then it maybe high time that one called for fridge repair in Fort Lauderdale.
Unusual Noises
This is an alarming sign for the compressor or the fans within the refrigerator if one hears unusual sounds from the refrigerator. These problems can be solved by cleaning the coils, however, some noises may need professional intervention.
High Energy Bills
If you have realized that your energy bills have gone up all of a sudden, dirty coils could be to blame. Maintenance of your house can also be a way of ensuring that your energy consumption is moderate since everything will be cleaned.
Who to Call
Persistent Problems
If all the above methods have been used and the refrigerator remains in a bad state, then it will be advisable to seek professional help. Fridge repair in Fort Lauderdale can work on various problems and Name can deal with more complex ones.
Safety Concerns
Man working with electricity can be dangerous. However, if for any reason you feel that you are not sure of something or you do not feel safe doing it, then the best course of action is to call in more expert help.
Conclusion
One of the main and easy duties involves cleaning the refrigerator coils to allow the fridge to run effectively. Thus, adhere to the above steps to keep your appliance functioning optimally and not to spend more on power.
Sometimes, the users may not want to engage themselves in repairing or the problem may persist even after following the mentioned steps then it is always better to go for a professional fridge repair in Fort Lauderdale.
Maintenance performs the dual function of increasing the duration of use of the refrigerator as well as ensuring the correct and safe temperature for storing food. I hope you got your answer about how to clean refrigerator coils after reading this guide. If you have any other questions feel free to contact us.