A storage water heater provides hot water for daily use. However, it can wear out, leak, or stop working correctly with time. Installing a new one ensures a continual source of hot water and saves energy. Sound installation is essential when owning a new heater or replacing the old one. This guide explains the step-by-step process, from choosing the right unit to the final installation.
Choose The Right Heater
When purchasing a water heater, however, you should first determine the best unit to install. You should also consider tank size, energy efficiency, and fuel type. Electric heaters are easier to install, but gas heaters warm water faster. Pick a size that your household will use. A small tank won’t generate sufficient hot water and a considerable tank wastes energy. If you wish to save money, go for energy-efficient models.
Turn Off Power And Water
Eliminate the old unit only after turning off the power and water supply. The breaker should be turned off for electric heaters, and the gas valve should be turned off for gas heaters. Turn off the cold water supply so you do not get leaks. Let hot water out of a tap to relieve pressure. A hose attached to the drain valve drains the old heater.
Remove The Old Heater
Disconnect the water and power lines. Be careful when detaching the gas line if it’s a gas heater. The old unit is removed, and the water connections are unscrewed. Lift with a dolly, as some heaters are heavy. According to local regulations, dispose of the old unit.
Install The New Heater
Install the new heater in the right spot, but provide proper ventilation and clearance. Connect the water lines securely. Fittings are prone to leaking; you are strongly advised to use a plumber’s tape. For gas models, connect the gas line and ensure no gas leakage using soapy water. Connect the wiring correctly for electric models. Safety depends on following the manufacturer’s instructions.
Fill And Test The Heater
Fill the tank with the cold water supply you have turned on. Let the air escape from a hot water tap before opening. When the tank is full, check four leaks. For gas models, light the pilot and set the thermostat. For models with electric heating, restore power and set the temperature. Wait until the water heats and test the system.
Ensure Safety And Efficiency
Look for leaks on all connections and valves. Insulating the pipes will help retain the heat and increase the efficiency. Keep the house down to a safe temperature, 120°F, for example, to prevent burns and avoid wasteful energy usage. Flushing the tank and checking the anode rod for regular maintenance from https://www.plumbersingapore.org/storage-water-heater-installation-and-replacement/ will keep your heater going as long as possible.
Replacing or installing a storage water heater makes your home more comfortable and efficient. These steps, as mentioned above, help make the installation safe and efficient. With proper maintenance, it will run smoothly for years.
How To Find Experts
It is very important to hire an expert like https://www.plumbersingapore.org/our-services/ for storage water heater installation to receive the right kind of service.
1. Search Online
Using a search engine and local directory website, you can find water heater installers in your nearby region. Websites like Google Maps, Yelp, and Angi list professionals with reviews and ratings.
2. Check Professional Websites
Browse the websites of local plumbing companies or water heater manufacturers. Most firms provide contacts of certified installers who handle their various products.
3. Read Reviews and Ratings
Google, Yelp, Trustpilot, etc., can be used to read previous clients’ experiences and ask them to give an account of their experiences. The best criteria to consider are the service provider’s rating and commendation on aspects such as professionalism, punctuality, and artistry.
4. Ask for Recommendations
A few close friends or relatives may have recently fitted themselves with an instant water heater. Recommendations help search for qualified specialists since they come from people with experience working with this particular specialist.
Keep an eye for more latest news & updates on Evolve Feed!